CALPlex DataLogger
TechniCAL's CALPlex™ datalogger instrument was designed specifically for conducting heat penetration and temperature distribution tests. It provides inputs for recording up to 32 temperature channels directly onto a computer storage disk with the use of the CALSoft software and a laptop computer.The CALPlex unit is small, compact and portable, yet it can withstand the harsh environments of production plants. The unit comes equipped with the necessary communications and power cables and also contains an internal battery for situations where electricity is not available.
Technical Specifications
- Dimensions
- Length: 12.25 inches (285.75 mm)
- Depth: 11.25 inches (311.15 mm)
- Height: 2.5 inches (63.5 mm)
- Weight: 7.5 pounds (3.4 KG)
- Temperature Specifications
- Input Range: 0° to 300° F (18° C to 149° C)
- Resolution: 0.1° F (0.06° C)
- Accuracy: + 0.2° F (0.1° C) for each channel
- Variability: + 0.2° F (0.1° C) channel to channel
- Long Term Stability, Repeatability: + 0.5° F (0.28° C)
- External Power Supply
- Input Range capacity: 95 - 250 volts / 47 - 63 hertz
- Custom power supply supplied with unit (cannot be interchanged with standard computer power supply)
- Communications
- RS-232 Serial Connection
- 9-pin cable supplied with unit
- Input Capability
- 32 channels
- Subminiature Omega connectors
- Accepts signal from Type T thermocouples
- Computer / Software Required (not included)
- Laptop/portable style recommended for plant use
- PC with 486 processor or better (Macintosh/Apple not compatible)
- Internal hard drive required
- 4 MB of RAM (minimum) required
- COMM Port required
- CALPlex only operates with the use of CALSoft software
- Internal Battery
- Internal NiCad battery pack
- Rechargeable when AC is connected
- 4 hours of use fully charged
- Takes about 6 hours to recharge a completely drained battery
